Posts Tagged ‘surface’

MARK office by GRIP&Co., Tokyo – Japan

May 22nd, 2018

Modeled on the brick and steel plating architecture that is characteristic of Tokyo’s Tsukiji district, we proposed constructing a space that utilizes patterned tiles and copper sheeting that recreates an interior reminiscent of the familiar Tsukiji surrounds.

SINGULARU Trendy Jewels store by Huuun + Branding&Retail, Valencia – Spain

May 9th, 2018

Within this concept of tailor made design, and adapted to the new shopping consumer habits, a very dynamic purchasing process has been achieved. All its collection of products, necklaces, bracelets, earrings and rings, is implemented over the furniture surface itself without any type of physical barrier.

Sai Gon Thuong Mai Hotel by H2 Arch, Vinh – Vietnam

April 30th, 2018

So the wood product is also made with a large amount involving many joinery shops waste lots of wood slab. That made the concept of using small wooden pillars be born. We collected the wood slab, planned and rolled them into many small wooden pillars with same size combining with iron frames to set some kinds of the module.

Argolite booth at Swissbau 2018 by Dobas AG, Basel – Switzerland

April 11th, 2018

The exhibition stand was constructed from two semi-transparent fabric skins, the outer skin created a white cube, the inner skin was broken up into fragments, thus setting a strong contrast to the cube. Between the two covers spots brightly illuminate the walls. Focus points were seven HPL pyramids piercing through the inner skin, each surface of a pyramid was equipped with an application-specific HPL.

“Minima | Maxima” installation by Marc Fornes, Astana – Kazakhstan

September 14th, 2017

The project was commissioned for World Expo 2017, an event which showcases architectural and engineering innovations. The structure will remain a permanent installation that incites curiosity and engagement on the site.

Ilda side table by Jean-Marie Massaud for Poliform

July 13th, 2017

Hand-crafted by Italian artisans, each Ilda base becomes truly unique with its signature Y shape that also resembles unruly tree branches. A classic marble surface is strategically placed to juxtapose with the bronze base, making Ilda a perfect accent/ personality piece in an array of home settings.

Lunapark coffee table by Alessandro Zambelli for Secondome

July 10th, 2017

Thanks to its special production technique, Lunapark’s glass flows into curves which define the table’s shape and, like poured sugar, contains tiny air bubbles which make the surface unexpectedly soft and velvety.

Hand-Laid Brick Feature Wall by 22quadrat, Freising – Germany

May 27th, 2017

Water-struck brick is made of clay with a high moisture content and plasticity. These bricks have a unique surface texture after firing and are denser than standard bricks, which enhances all of brick’s natural benefits, such as strength, durability, resistance to weather and pests, and thermal mass efficiency.

Algorithm lighting system by vibia

March 2nd, 2017

Like a constellation, a flock of birds or a cloud of frozen rain, this collection brings together beauty and geometry within a lighting system filled with magic. “The intention was not to design a completely defined and ‘finished’ product, but a tool which allows any customer to create his own lighting lamp, in relation with the architecture space, the area to light and the desired kind of ‘graphic pattern”, according to Toan Nguyen.

Puno light by Das Happy Medium

February 14th, 2017

Puno is a table and/or wall light with character. The light stands triumphantly on a surface or hangs organically of a wall. A complicated, yet polygonally reduced hand structure complements the simplicity of the lighting tube.

3D concrete printing by Bekkering Adams

February 2nd, 2017

Rotterdam-based architecture firm Bekkering Adams has taken the concrete dream one step further to test the partnership of concrete and technology in a more tangible way, with the proposal “Fire Wall”. In collaboration with the Technical University of Eindhoven and Cement & Beton Centrum, the prototype experiments investigate the effects gained by altering the variables of the technology – changes in height, speed and texture all produce different results.

Lin Mao Sen tea shop by Ahead Concept, Taipei City – Taiwan

December 24th, 2016

The perspective along the ceiling border to the pillar structure conveys dynamic interaction. The large wooden plaque in the hall implies Eastern Heritage and thus extends the continuity of cultural connotation. Listed in a symmetrical order, the value principal is derived from a metaphor for the spatial texture of oriental residence.

MINA-TO communication space by Mandai Architects, Tokyo – Japan

December 6th, 2016

By attaching aluminum on the steel plate, this wall makes it possible to exhibit paintings freely anywhere with magnets. This wall will also reflect the surrounding light and scenery and will change over while overlapping with the painting.

Ceramic vases by Hélène Morbu

September 21st, 2016

Guided by craftsmanship, Hélène Morbu uses a slow and precise technique that ‘squeezes the earth’ and as a result, the ‘quetzal’ vases display an effect resembling textile or rattan.

ZORA27 store by cityscape architects, Plovdiv – Bulgaria

August 10th, 2016

Each zone gently flows into the next without interruption yet a subtle feeling of movement and direction dominates. The central zone contrasts the rest not only in colour but also in surface finishes and light. Backlit panels pinpoint promotional areas.

Bathroom furniture by Philipp Aduatz for Klomfar

August 2nd, 2016

The surface structure was rendered by use of cad-software, known from the production of blockbusters, in order to shape it ready for CNC machining.

BIOTOPIA Wireless 360 Audio exhibition by WGNB, Seoul – South Korea

July 29th, 2016

Omnidirectional sound breaks the silence on the surface of water to create various waves that are projected on the ceiling to transfer free sound moving from one device to another to the graphic of creating actual sound instead of artificial graphic with UX element.

Marqué furniture collection by Alessandro Zambelli

July 26th, 2016

Marqué is a set of furniture pieces: a dry bar, a console cabinet and a coffee table. The collection rethinks its use of materials – iron, copper and brass – in “cabinetmaking” terms.

Focus Light collection by Cozì Studio

July 10th, 2016

The ‘Focus Light’ employs selective laser sintering to generate a flexible and durable three-dimensional piece. By expanding the textural surface around the light source, light is dampened and diffused around the focus point to bath the room in soft, warm light.

Fumi Coffee by Alberto Caiola, Shanghai – China

July 8th, 2016

Rich and dark in color, the ceiling’s ‘fumes’ evoke the depth of the drink itself, winding up and beyond the venue’s glass façade. Lending a sense of movement to the entire space, the installation creates a partially covered area for attractive outdoor seating in warmer weather.